FACILITIES
We have standardized on the use of Mori Seiki mills and lathes for milling and turning.
Mori Seiki is a premier supplier of such equipment, and we are proud to be one of their largest customers in Northern California.
The following is a list of our primary equipment:
2000 MORI-SEIKI 6-AXIS TWIN SPINDLE, TWIN TURRET DL-151 CNC LATHE
CONTAINED and OPERATED in a
FULL-TEMPERATURE-CONTROLLED ENVIRONMENT 68°F ± 2°
ACCURACY ENHANCEMENTS INCLUDE:
LINEAR GLASS SCALE CLOSED-LOOP FEEDBACK SYSTEM ON 4 of the 6 AXES
TEMPERATURE-CONTROLLED CUTTING OIL 68°F ± 2°
TEMPERATURE-CONTROLLED WAY-LUBRICATION 68°F ± 2°
SPINDLE COOLER UNITS ON BOTH SPINDLES
TWO 12-STATION TURRETS WITH MILLING CAPABILITY ON ALL STATIONS
BOTH SPINDLES CAN TURN AT 5000 RPM and THEN STOP and INDEX IN .001 INCREMENTS ONE-TENTH MICRON!! OFFSET RESOLUTION
MAXIMUM TURNING DIAMETER - 7.8"
MAXIMUM TURNING LENGTH PER SPINDLE - 7.8"
BAR WORK CAPACITY - 1.7"
SEVENTEEN CNC MILLING MACHINES
Two-Machine, 20-Pallet Mori-Seiki SH-50 Horizontal Flexible Machining Cell
X axis travel 24.8”
Y axis travel 23.6”
Z axis travel 25.6”
One machine has full four-axis capability
One machine can perform 1-degree indexing
1000 PSI through the spindle coolant on both machines
180 tools per machine
Full un-manned capability
20”- square pallets
30 horsepower
12,000 RPM
FANUC 18M 32-bit microprocessor control
1995 Mori-Seiki SV-50 Four-Axis CNC Vertical Milling Machine
X axis travel 31.5”
Y axis travel 20.0”
Z axis travel 20.0”
Full four-axis simultaneous control
20 tool automatic tool changer - .8 second tool changer
1200” per minute rapid feed rate
600” per minute feed rate
30 horsepower
10,000 RPM direct drive spindle
FANUC 18M 32-bit microprocessor control
1995 Mori-Seiki SV-50 Four-Axis CNC Vertical Milling Machine
X axis travel 31.5”
Y axis travel 20.0”
Z axis travel 20.0”
Full four-axis simultaneous control
20 tool automatic tool changer - .8 second tool changer
1200” per minute rapid feed rate
600” per minute feed rate
30 horsepower
10,000 RPM direct drive spindle
FANUC 18M 32-bit microprocessor control
1995 Mori-Seiki SV-50 Four-Axis CNC Vertical Milling Machine
X axis travel 31.5”
Y axis travel 20.0”
Z axis travel 20.0”
Full three-axis simultaneous control
20 tool automatic tool changer - .8 second tool changer
1200” per minute rapid feed rate
600” per minute feed rate
30 horsepower
10,000 RPM direct drive spindle
FANUC 18M 32-bit microprocessor control
1995 Mori-Seiki MV-40B Three-Axis CNC Vertical Pallet Changer Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
30 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 16M 32-bit microprocessor control
1995 Mori-Seiki MV-40B Three-Axis CNC Vertical Pallet Changer Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
30 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 16M 32-bit microprocessor control
1994 Mori-Seiki MV-40B Three-Axis CNC Vertical Pallet Changer Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
30 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 16M 32-bit microprocessor control
1994 Mori-Seiki MV-40B Three-Axis CNC Vertical Pallet Changer Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
30 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 16M 32-bit microprocessor control
1994 Mori-Seiki MV-40B Three-Axis CNC Vertical Pallet Changer Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
30 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 16M 32-bit microprocessor control
1994 Mori-Seiki MV-40B Three-Axis CNC Vertical Pallet Changer Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
30 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 16M 32-bit microprocessor control
1993 Mori-Seiki MV-40B Three-Axis CNC Vertical Pallet Changer Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
30 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC OMC 32-bit microprocessor control
1992 Mori-Seiki MV-40B Four-Axis CNC Vertical Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
A axis 360-degrees in .001 degree increments
Full four-axis simultaneous capability
Twelve-inch diameter Tecnara MDH300R rotary table
20 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC OMC 32-bit microprocessor control
1991 Mori-Seiki MV-40B Three-Axis CNC Vertical Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
20 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC OMC 32-bit microprocessor control
1990 Mori-Seiki MV-40B Three-Axis CNC Vertical Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full three-axis simultaneous control
20 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC OMC 32-bit microprocessor control
1989 Mori-Seiki MV-40B Four-Axis CNC Vertical Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
Full four-axis simultaneous capability
20 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 10M control
1988 Mori-Seiki MV-40B Four-Axis CNC Vertical Mill
X axis travel 31.5”
Y axis travel 16.0”
Z axis travel 20.0”
A axis 360-degrees in .001 degree increments
Full four-axis simultaneous capability
Twelve-inch diameter Tecnara MDH300R rotary table
20 tool automatic tool changer - 1.2 second tool changer
800” per minute rapid feed rate
8,000 RPM direct drive spindle
FANUC 10M control
TOTAL OF NINE CNC LATHES
1998 Mori Seiki SL-250B/500 Lathe
Contained and Operated in a Full-Temperature-Controlled Environment 68°F ± 2°
Maximum turning diameter is 15.3”
Minimum reasonable diameter is 1”
Maximum part length is 19.1”
20 horsepower AC spindle-driven motor
10 tool turret
Minimum resolution of .0001
10” diameter counter centrifugal 3-jaw chuck
6" and 10" air chucks
35 - 3,500 RPM
FANUC 21T control
1995 Mori-Seiki CL-25 CNC Lathe
Maximum turning diameter is 17.7”
Minimum reasonable diameter is 1”
Maximum part length is 6”
20 horsepower AC spindle-driven motor
10 tool turret
Minimum resolution of .0001
10” diameter counter centrifugal 3-jaw chuck
30 - 3,000 RPM
FANUC 18T control
1995 Mori-Seiki CL-25 CNC Lathe
Maximum turning diameter is 17.7”
Minimum reasonable diameter is 1”
Maximum part length is 6”
20 horsepower AC spindle-driven motor
10 tool turret
Minimum resolution of .0001
10” diameter Northfield air chuck
30 - 3.000 RPM
FANUC 18T control
1993 Mori-Seiki SL-25 CNC Lathe with Programmable Tailstock
Maximum turning diameter is 14.9”
Minimum reasonable diameter is 1”
Maximum part length is 22”
20 horsepower AC spindle-driven motor
10-station turret - .7 second tool change
600” per minute rapid positioning
Minimum resolution of .0001
10” counter centrifugal 3-jaw chuck
35 - 3.500 RPM
FANUC 16T control
1993 Mori-Seiki SL-25 CNC Lathe
Maximum turning diameter is 14.9”
Minimum reasonable diameter is 1”
Maximum part length is 22”
20 horsepower AC spindle-driven motor
10-station turret - .7 second tool change
600” per minute rapid positioning
Minimum resolution of .0001
10” counter centrifugal 3-jaw chuck
35 - 3.500 RPM
FANUC 16T control
1989 Mori-Seiki SL-25 CNC Lathe with Tailstock
Maximum turning diameter is 14.9”
Minimum reasonable diameter is 1”
Maximum part length is 22”
20 horsepower AC spindle-driven motor
10-station turret - .7 second tool change
600” per minute rapid positioning
Minimum resolution of .0001
10” counter centrifugal 3-jaw chuck
35 - 3.500 RPM
FANUC 10T control
1984 Mori-Seiki SL-3H CNC Lathe with Tailstock
Maximum turning diameter is 10”
Minimum reasonable diameter is 1”
Maximum part length is 18”
20 horsepower spindle drive with high and low gears
12-tool turret
Minimum resolution of .0001
10” counter centrifugal 3-jaw chuck or Northfield 10” air chuck (.0001 TIR)
190 - 4,000 RPM
FANUC 6T control
1984 Mori-Seiki SL-2H CNC Lathe
Maximum turning diameter is 10”
Minimum reasonable diameter is 1”
Maximum part length is 6”
20 horsepower spindle drive with high and low gears
12-tool turret
Minimum resolution of .0001
10” counter centrifugal 3-jaw chuck or Northfield 10” air chuck (.0001 TIR)
190 - 4,000 RPM
FANUC 6T control
Plus manual machine tools, surface roughness checking equipment and extensive inspection facilities.
INSPECTION EQUIPMENT
Mitutoyo CNC Coordinate Measuring Machine
Model: BRT - 707 with Geopak 2100 Software
Precision Glass Scale in Each Axis Provide Resolution of .00002”
High Accuracy at Maximum Drive Speed of 430 MM/SEC
Working Range: X=28” Y=24” Z=18”
• Renishaw PH 9
• Mitutoyo Model - BH 706 Coordinate Measuring Machine with Geopak 2000 and 500 Software
• Federal System 5000 Surface Analyzer
• Fischerscope MMS Coating Thickness Measuring System
• Temperature-Controlled Inspection Room
• Mitutoyo Optical Comparator, Model PH350 - 6x4 Inch Travel - 10 and 20 Power Lenses - Surface Illumination - Linear Scale Digital Read-Out System - Radius and Thread Layout Profile Layover Screens
• Precision Devices Surface Finish Profilometer
• Microscope - 10 and 40 Power Magnification
• Microscope - 14 thru 90 Power Magnification
• Etalon Inner Micrometers from .400” to 4.0” Reading in .0001” increments from 4.0” to 6.0” Reading in .0005” increments, All Necessary Setting Rings from .400” to 6.0” Diameter
• Electronic Digital Micrometers from 0 to 4 inches, Reading in 50 Millionths (.00005”) increments
• Extensive Set of Measuring Pins
• Extensive Set of Deltronic Pins in .0001” increments
• Granite Surface Plates - 12” x 18”, 18” x 24”, and 3 ft. by 5 ft. by 8 1/2” thick, grade AAA
• Standard Outside Micrometers from 0 to 12 inches in .0001” increments
• Four 81-Piece Gage Block Sets
• Dial Bore Gages from 1.4 to 6.0 inches
• Flange Micrometers form 0 to 8.0 inches
• Blade Micrometers from 0 to 8.0 inches
• Pin Micrometers from 0 to 2.0 inches
• Groove Micrometers from 0 to 1.0 inches
• Depth Micrometers from 0 to 12.0 inches
• Eight 18-inch and three 12-inch Dial Height Gages
• Dial Indicators 0 to 1.0 inch in .001” increments
• Dial Indicators 0 to 1.0 inch in .0001” increments
• Test Indicators in .0005” and .0001” increments
• Two Mitutoyo Digital Drop Indicators in .0001” increments
• Internal Dial Gages 0.4 to 1.4 inches
• Two Magnetic-Based Indicator Holders
• Three Sets of Precision Vee Blocks
• One-Two-Three Blocks
• Two Precision Angle Plates
• Five-Inch Sine Bar
• Dial Gage Stand
• Precision Toolmaker’s Vise
• Universal Bevel Protractor
• Radius Gages
• Pitch Gages
• Telescoping Gages | 
